Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Austin, TX
Calder Gate Repair is the gate company Austin homeowners call when a gate stops opening, sags on its hinges, or starts grinding against a post that has shifted in the caliche soil. Austin gate work is not like gate work in Dallas or Houston. The housing stock swings from 1970s ranch properties with long limestone driveways to brand-new master-planned communities running UL 325-compliant smart openers, and the heat, flash floods, and Hill Country wildlife all take a toll on hardware. Call (903) 354-7419 when your gate stops behaving, and we’ll give you a written price before anything gets touched.
Why Austin Homes Are Different
Most Austin gates were never built for the soil they sit on. The expansive clay common west of I-35 swells after rain and shrinks during drought, which is why gates in Tarrytown and Westlake Hills so often sag within a few seasons. The post shifts, the hinge geometry changes, and suddenly a gate that closed cleanly for years starts dragging across the driveway. In those neighborhoods, where tall deer fences and custom gates are the norm, we regularly see hinge reinforcement and post re-setting work that homeowners in flatter, sandier cities never need.
The heat is the other constant. Weeks of 100°F-plus temperatures push gate opener motors past their duty cycle, cook control boards, and shorten battery life on solar-charged systems. Then come the spring cedar pollen and live oak tassels that pack into tracks and sensor housings across the Hill Country. Add in white-tailed deer pressure – a buck leaning against a gate is enough to knock a misaligned limit switch out of calibration – and you have a market where gate maintenance is genuinely year-round, not seasonal. Nico Alvarez and our Austin techs carry replacement boards, batteries, and hinge hardware on the truck because they know the next call is never far away.
Styles & brands we work with
Our Main Austin Services
Austin homeowners most often call us for two things: a gate that has physically failed, and an opener that has stopped responding. Each service has its own dedicated Austin page below.
Gate Repair in Austin
Physical gate repair in Austin is usually about steel, stone, and gravity. We re-hang sagging gates, reinforce hinges on heavy ranch-style tube gates, reset posts that have shifted in clay or caliche soil, and repair or replace damaged sections of iron, aluminum, and chain-link. A lot of the gates we see in neighborhoods like Circle C or along the southwestern corridors are contractor-grade installs that were never quite square to begin with, and Austin’s wet-dry cycles expose that within a few years. We quote the full repair in writing before we start, and the price we quote is the price you pay. Learn more on our Gate Repair in Austin page.
Electric Gate Repair in Austin
Electric gate repair in Austin is where the heat does its worst work. Control boards fry, capacitors wear out, and batteries in solar systems fail faster than their rated life because of sustained high temperatures. We also see a steady stream of safety-sensor misalignments, overloaded motors on long, heavy gates, and wiring that has been compromised by rodents or by UV exposure. If your gate has power but will not move, or moves partway and reverses, this is the service you need. Read the full breakdown at Electric Gate Repair in Austin.
Gate Opener Repair in Austin
When the opener itself is the problem – a stripped gear, a dead limit switch (the small sensor that tells the gate when to stop), a receiver that no longer pairs with your remote – our Austin techs diagnose it on the spot and usually have the part on the truck. We are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which covers nearly every residential opener in the Austin market. No vague “all brands” talk: if you tell us what is on the gate, we can tell you what it is likely to cost before we arrive. Details at Gate Opener Repair in Austin.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Austin
We service and stock parts for the openers Austin homes actually have, including FAAC, Linear, and Viking systems on Hill Country estate gates and BFT openers throughout newer HOA communities. Our techs are factory-familiar with nine major brands, and our Austin trucks carry common boards, remotes, and hardware. That means most repairs are diagnosed and completed the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Austin, TX
Every Austin job gets a written price before work starts. The figures below are the ranges our Austin customers most often see, and they are honest numbers, not teaser rates.
| Service | Typical range in Austin |
|---|---|
| Gate opener troubleshooting | $95 – $175 service call |
| Gate opener repair | $185 – $440 before parts |
| Gate opener replacement | $650 – $2,100 per opener |
| Heavy-duty opener upgrade | $1,300 – $4,000+ |
| Steel gate install | $1,200 – $4,800 |
| Aluminum gate install | $1,400 – $4,200 |
| Iron gate install | $2,500 – $8,000+ |
| Driveway gate motor replacement | $450 – $1,350 |
| Gate hinge replacement | $150 – $550 per set |
| Post reset / re-weld | $350 – $1,200 |
| Gate voltage / wiring repair | $175 – $650 |
| Complete gate replacement | $2,800 – $12,000+ |
In Austin specifically, expect to pay more when the gate is oversized or built on a sloped driveway, when the soil has shifted and posts need re-setting rather than simple hinge work, or when the opener is an older FAAC or Viking model that needs a board we have to source. The number we quote at the door is the number on your invoice, always, and every repair carries our 365-Day Done Right Promise: if it fails within a year, we come back at no charge.
Neighborhoods We Serve in Austin
Our Austin techs work across the metro every day, from the Hill Country estates west of Loop 360 to the fast-growing subdivisions pushing out toward Manor and Buda. These are the areas we see most often:
- Tarrytown
- Westlake Hills
- Circle C Ranch
- Mueller
- Steiner Ranch
Most Austin jobs can be scheduled within the same week, and emergency calls are answered by a live person 24/7 with a trackable arrival time, not a four-hour window.
Service Area – Cities Near Austin
While this page focuses on Austin itself, our techs also serve the surrounding metro. If you are in Manor, TX, Buda, TX, Georgetown, TX, or Kyle, TX, give us a call and we will let you know the next available slot for your area.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Austin
Most Austin repairs are scheduled within the same week, and we keep emergency slots open every day for gates that will not close and leave a property unsecured. Call (903) 354-7419 and you will speak to a live person who can give you a real arrival window, not a recording.
Many of the newer master-planned communities around Austin do require UL 325-compliant operators with photo eyes and reversing edges, and some have architectural rules about gate style and height. If your HOA has requirements, we install to meet them and can provide the documentation your management company asks for.
We handle the whole gate: the opener, the gate itself, the hinges, the posts, the wiring, and the safety sensors. One tech, one truck, one written price for the complete job before we start.
If your gate is stuck, sagging, or making a sound it never made before, call Calder Gate Repair at (903) 354-7419. We will tell you what it should cost before we come out, and every repair is backed in writing for 365 days.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Austin Customers Say
"Slide gate wheels replaced. Glides smoothly now."
- Mark T."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.