Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lago Vista
Gate repair in Lago Vista usually costs between $185 and $650 depending on whether we’re realigning a sagging swing gate, replacing a seized hinge, or swapping out a dead opener control board. Most jobs are finished in one visit, and we carry common parts for LiftMaster, Ghost Controls, and Mighty Mule openers on the truck so you’re not waiting a week for a bracket. Lago Vista’s limestone slopes and lake humidity create gate failures you won’t see in flat neighborhoods, which is why our Gate Repair team treats every hillside driveway as its own small engineering problem, not a parts-swap job. If your gate is dragging, jamming, or refusing to close, call Calder Gate Repair Austin at (903) 354-7419 and we’ll give you a written price before anything gets unbolted.
Why Calder Gate Repair Austin Is Lago Vista’s Preferred Gate Repair Company
Our Gate Repair in Lago Vista customers keep calling us back because we show up when we say we will and the invoice matches the quote. Nico Alvarez runs the crews from the brand’s Austin office, so when a Lago Vista homeowner books a repair, there’s a real dispatcher on the phone and a real technician with a live arrival time headed west down FM 1431. When a swing gate sags on a steep lot in Highland Lake Estates, the fix usually involves more than a hinge pin; the post footing has often loosened in limestone soil, and we handle that the same day rather than scheduling a second trip.
Every Lago Vista job carries the same three standing promises, in writing: a price before work begins, a written guarantee, and a free second visit if the repair fails within the 365-Day Done Right Promise window. Nobody on our team will show up in a personal vehicle or without a background check. The Relay Standard applies to every visit from booking to invoice: live trackable arrival time, before-and-after photos of the actual work, and a digital invoice you pay from a link. No four-hour windows, no cash-only surprises.
Lago Vista homeowners deal with a specific set of problems: UV-cracked opener housings from Hill Country sun, gate posts leaning after flash floods, and legacy control boards from the 1980s and 1990s that fail intermittently. We’re factory-familiar with nine major opener brands, so when a DoorKing board from 1997 won’t hold its limit settings, we can usually tell you over the phone whether it’s worth repairing or cheaper to retrofit a modern operator.
Styles & brands we work with





Metal Gate Repair in Lago Vista
Metal Gate Repair in Lago Vista usually means one of three things: a steel or wrought-iron swing gate that has sagged on its hinges, a slide gate that jumps the rack on a sloped driveway, or rusted posts that have lost their footing in limestone soil. Most metal gate repairs in this area run $210 to $480 before any replacement parts. When a gate has been shifting for months, the hinge bushings are usually ovaled out and the hinge itself may be bent; we replace the bushings, straighten or swap the hinge, and reset the post if it’s moved. On Lago Vista’s west side near the Balcones Canyonlands, soil creep after heavy rain pushes posts downhill gradually, so a gate that looked level in March can be dragging by June.
Hinge and Post Repair on Sloped Lots
On steep driveways, a hinge post takes a lot more than the gate’s weight. The soil on Lago Vista hillsides doesn’t always stay put; heavy rain turns limestone dust into a slurry that lets posts lean a few degrees downhill. We dig out the old footing, set the post deeper with rebar and a wider concrete base, and let it cure before re-hanging the gate. The repair typically costs $240 to $520 depending on how far the post has moved.
Sagging Gate Realignment
A metal gate that drags at the latch end is usually a hinge problem, not a gate problem. We see this constantly on lakeside properties where humidity accelerates wear on bronze bushings. Replacing those bushings and adjusting the hinge positions runs $150 to $300 for most residential gates in Lago Vista. Leaving it alone costs more later; a sagging gate eventually bends its own hinge tabs and cracks the post weld.
Wood Gate Repair in Lago Vista
Wood Gate Repair in Lago Vista focuses on gates that have warped, rotted, or pulled loose from their posts after years of sun and lake humidity. Typical repairs run $180 to $420, with most jobs involving a rotted lower rail, loose pickets, or a hinge lag bolt that’s stripped out of the post. Cedar and redwood hold up better than pine in this climate, but any wood gate on a heavily treed lot spends its life in partial shade and stays damp, which is where rot starts. We remove the bad lumber, sister in new material, and re-set the hardware so the gate hangs square again.
Rotted Rail and Pickle Replacement
The bottom rail rots first because it sits closest to rain splash and sprinkler heads. On a Lago Vista hillside, runoff from a storm can keep that lower rail wet for days. We cut out the rotted section and splice in pressure-treated stock, then prime and paint the repair to match. The work usually lands between $160 and $350 per gate depending on how much lumber needs to come out.
Stripped Hinge Posts and Hardware
Wood gates in Lago Vista often tear their hinge screws out when the wood goes soft around the bolts. Re-driving bigger screws never holds for long. We epoxy-fill the stripped holes or sister a new block behind the hinge plate, then re-hang the gate with longer structural screws. A simple hinge re-seat is usually $120 to $220; a post that needs reinforcement runs higher and we’ll give you the exact number before we start.
Trusted Brands We Service in Lago Vista
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule openers every week in Lago Vista, and we keep the common wear parts for those brands stocked locally: limit switches, loop detectors, remotes, and control boards. Ghost Controls and Mighty Mule are the ones we see most on residential swing gates in this area. DoorKing and Elite show up most often on the larger estate entrances off FM 1431 and around the golf course communities. When an opener uses proprietary hardware, we don’t improvise; we order from the manufacturer’s legitimate parts channel so the repair holds up under UV and humidity instead of failing again in eighteen months.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lago Vista Homes
- UV-cracked operator housings. Intense Hill Country sun pushes plastic enclosures past their limit in five or six years, and once a housing cracks, limestone dust and lake moisture get inside. The control board corrodes, and the gate starts opening or stopping at random. We replace the housing or retrofit a weatherproof enclosure, usually $95 to $220.
- Gate posts shifting after flash floods. Steep driveways channel runoff straight at the gate post footing. We regularly see posts that have moved an inch or more downslope after a storm, leaving the gate jammed against the latch or dragging on the ground. The fix is a deeper footing with rebar, not just pushing the post back.
- Legacy control board failures. Homes built in the 1980s and 1990s still run original boards from brands that no longer make replacements. These boards fail intermittently, often after a storm when humidity spikes. We diagnose the board, and if no OEM replacement exists, we quote a retrofit to a modern operator with the safety features required today. Boards that can be repaired are repaired; boards that can’t get a straight answer, not a temporary patch.
- Swing gates sagging on hillside hinges. On a slope, a swing gate’s entire weight sits on the hinges twenty-four hours a day. Bronze bushings wear out in a few years under that load, and once the gate sags a half-inch, the safety photocell beam can be blocked by the bottom rail, which makes the gate refuse to close. We replace the bushings and re-aim the beam, typically $180 to $340.
Pricing for Gate Repair in Lago Vista, TX
Here’s what Lago Vista homeowners can expect to pay for common repairs, including labor and standard parts:
- Hinge bushing replacement and gate realignment: $150 – $300
- Post reset with deeper concrete footing and rebar: $240 – $520
- Control board diagnosis and replacement (where parts exist): $195 – $450
- Opener retrofit for a legacy system with no available parts: $650 – $1,400 installed
- Photocell realignment or replacement: $95 – $185
- Wood gate rot repair (rail or picket sistering): $160 – $420
- Emergency service call in Lago Vista: $95 diagnostic, applied toward the repair
The number we quote is the number you pay. Every job gets a written price agreed to before any work starts, and the 365-Day Done Right Promise is printed on every invoice. If the same repair fails within a year, we come back at no charge. For an exact quote on your gate, call (903) 354-7419 and describe what’s happening; if we can’t diagnose it over the phone, we’ll schedule a visit and give you the number before we touch a tool.
We Also Serve Cities Near Lago Vista
Beyond Lago Vista, Calder Gate Repair Austin covers Austin, Georgetown, Kyle, and Lakeway. Many of those areas have flatter terrain than Lago Vista’s limestone slopes, but the opener brands and control boards are the same. If your property sits outside Lago Vista proper, call (903) 354-7419 and we’ll confirm coverage for your address before booking.
Serving Lago Vista, TX - Our Local Coverage Area
We’re based in the Lago Vista area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lago Vista
Heavy rain in Lago Vista saturates the limestone soil, and on a slope, that soil can creep downhill a fraction of an inch at a time. Your gate post probably moved slightly, not the gate itself. We see this constantly on steep driveways where runoff channels straight toward the post footing. The fix is resetting the post in a deeper concrete footing with rebar, usually $240 to $520 depending on the post size and slope. Call (903) 354-7419 and we’ll confirm the cause before quoting.
Sometimes yes. If the board’s failure is a corroded relay or a cracked solder joint, we can often repair it for under $250. But many 1990s boards from brands like early DoorKing or Elite have no replacement parts left, and a repaired board with old capacitors will fail again, often at the worst time. In those cases we quote a retrofit to a modern operator, usually $650 to $1,400 installed, and the new unit includes current safety photocells and code-compliant entrapment protection. The old board doesn’t get patched indefinitely just to kick the problem down the road.
On the west side of Lago Vista near the canyonlands, soil creep moves the entire post footing downhill slowly, so the post can stay visually straight while its base has shifted an inch or more. The gate then pulls away from the latch or drags at the hinge side. We find this by measuring from the gate to a fixed point like a fence line or driveway edge, not by eyeballing the post. Once confirmed, we reset the footing with rebar and a wider base, typically $300 to $520.
If the gate has an automatic opener, yes. Modern safety standards require an entrapment protection system, and a gate without working photocells or a reverse edge is a hazard to kids, pets, and delivery drivers. When we retrofit a legacy opener, the new unit includes photocells and we set them at the manufacturer’s specified height. If your existing opener has photocells, we test and re-aim them as part of every repair. Skipping this isn’t a way to save money; it’s a liability and a code violation.
Usually the rack and pinion are worn at the end where the gate spends most of its time in the closed position. The pinion gear’s teeth round off, and the gate climbs the rack instead of riding it. Lago Vista’s limestone dust accelerates this wear by acting like a mild abrasive paste on the gear teeth. We replace the rack section or pinion as needed, typically $260 to $480, and re-grease the assembly with a dry lubricant that doesn’t collect dust. A bent wheel bracket can cause the same symptom, and we check that before quoting the rack. Call (903) 354-7419 for an exact price.
Written by Nico Alvarez, Owner at Calder Gate Repair Austin, serving Lago Vista since establishing the Austin office in 2009.