Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Georgetown, TX
Calder Gate Repair handles gate service across Georgetown, TX, from Sun City automatic driveway gates to older ranch-style gates on the east side of I-35. Georgetown’s mix of historic homes near the Square and fast-growing master-planned communities means gate jobs here rarely look alike, and the local soil and weather add their own complications. We’re the dedicated gate repair specialist inside the Relay Home Co. family, and every Georgetown job starts with a written price before any work begins. Call (903) 354-7419 and you’ll speak with a live person, not a voicemail.
Why Georgetown Homes Are Different
Georgetown’s growth spurt over the last 15 years created a split housing stock that shows up in every gate we open. Near the Square, you’ll find Victorian and Craftsman homes with narrow drives and older chain-link or wood gates. Out in Sun City and Teravista, the norm is decorative wrought iron, automatic openers, and HOA covenants that dictate materials, finishes, and even gate heights. Those HOAs matter: we’ve replaced gates in Sun City where the covenant required a specific iron finish, not just any black paint off the shelf.
The ground itself works against gates here. Georgetown sits on alkaline limestone soil, and the region’s heavy spring rains and flash flooding erode soil around gate posts, which is why sagging and misalignment are so common. Hot, humid summers speed up rust on metal hardware. And in Sun City especially, we see a pattern after thunderstorms: low-voltage automatic openers with lightning-damaged control boards. When a Georgetown gate won’t open after a storm, that’s the first thing we check.
Styles & brands we work with
Our Main Georgetown Services
Most Georgetown calls fall into two buckets: a gate that won’t move at all, or an opener that runs but won’t open or close correctly. Here’s what each service involves locally.
Gate Repair in Georgetown
A sagging iron gate, a wooden gate that drags on the driveway, rusted hinges, or a post that’s shifted after a hard rain. Georgetown’s clay-heavy and limestone soils move with moisture, so we often find posts that have tilted just enough to throw the gate out of alignment. We realign, reinforce, and replace worn hardware, and we quote the full job before we touch a bolt. See Gate Repair in Georgetown for specifics.
Electric Gate Repair in Georgetown
Electric gates in Georgetown run on low-voltage systems, and the local storm pattern creates a predictable failure point: lightning strikes near the opener, the control board takes the hit, and the gate goes dead. We diagnose the board, the wiring, the sensors, and the operator itself, then give you a written price for the fix. See Electric Gate Repair in Georgetown for full details on how we approach these jobs.
Gate Opener Repair in Georgetown
If the opener hums but the gate doesn’t move, or the gate reverses before it closes, or the remote stopped working the day before, you’ve got an opener problem. We work on LiftMaster, FAAC, Linear, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, and we stock common boards and sensors locally so we’re not waiting on a parts truck. See Gate Opener Repair in Georgetown for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Georgetown
Our Georgetown techs are factory-familiar with the openers homeowners actually have here. We service FAAC and BFT hydraulic operators common on heavier iron gates, Linear and Viking on mid-range residential systems, and we keep the most common control boards and remotes on the truck. That means most jobs finish same-day. Full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Georgetown, TX
Here’s what Georgetown homeowners can expect, based on the work we do most often in this area. Actual pricing depends on your gate’s size, material, and opener brand, but this gives you a real starting point before you pick up the phone.
| Service | Typical Range in Georgetown |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $200 – $400 before parts |
| Standard gate repair service | $155 – $310 before parts |
| Spring replacement on iron gates | $225 – $435 |
| Hinge replacement (welded or bolted) | $175 – $395 per hinge set |
| Post realignment after soil erosion or shifting | $290 – $550 per post |
| Control board replacement | $215 – $465 before parts |
| Sensor and safety edge replacement | $155 – $285 per sensor/edge |
| Keypad and remote programming | $95 – $220 per unit |
| Swing or slide gate motor replacement | $625 – $1,350 before parts |
| Full new gate installation, including post set | $1,800 – $6,000+ before materials |
Two things push a Georgetown price upward more than anything else: HOA-required finishes that call for custom paint or powder coating, and posts that have shifted so far the whole gate frame needs re-setting, not just adjusting. Whatever the number ends up being, you’ll see it in writing before we start. The price we agree to is the price you pay.
Neighborhoods We Serve in Georgetown
We work all over Georgetown, and we know the gate styles neighborhood by neighborhood. Here’s a representative slice of where we’re out most weeks:
- Sun City
- Teravista
- Old Town / The Square area
- Berry Creek
- Rancho Sienna
Our typical response window in Georgetown runs two to four hours for non-emergency calls. If your gate is stuck open and you need someone sooner, tell the phone team and we’ll flag it for the earliest available dispatch.
Service Area – Cities Near Georgetown
Our Georgetown crews also cover the surrounding communities along the I-35 and 130 corridors. We regularly serve Taylor, TX, Manor, TX, Austin, TX, and Buda, TX. If you’re just over the line in one of these areas, we can usually route a Georgetown-area tech to you the same day.
Serving Georgetown, TX - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Georgetown
If your gate is visible from the street and your HOA has architectural controls, yes, you’ll likely need approval before any finish or material change. We’ll tell you exactly what we’re replacing and what it looks like, so you can submit the paperwork without guessing. Repairs that match the existing gate rarely need approval.
Most non-emergency Georgetown calls get a two to four hour arrival window, with a live arrival time you can track. If your gate is stuck open or your driveway is blocked, call (903) 354-7419 and we’ll see if an earlier dispatch is available. We answer every call with a live person, 24/7.
Turn off the opener’s circuit breaker and leave the gate in a safe position, then call us. In Georgetown’s storm season, lightning damage to the control board is the most common cause, and we stock replacements for most major brands so we can usually fix it on the first visit. Call (903) 354-7419 and we’ll walk you through a quick check over the phone.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Georgetown Customers Say
"Slide gate wheels replaced. Glides smoothly now."
- Mark T."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.